Top 10 Best Led Light Bar Mount

Sturdy bracket strong aluminum alloy, fix the light on tube firmly, raise the light bar height to avoid scratches while driving. Useful rubber high quality rubber inserts dampen driving vibration and avoid scraping bull bar surface. Wide application can be used on tubes of 1, 1-12, 1-34 2 in diameter and applied to led light bar for almost all kinds of vehicle. Easy installation pre-drilled hole, allows more lights to be added to vehicle without drilling, Allen hex key included for quick installation. Package includes 4 PCs led light bar mounting bracket. Fit type Universal Fit.

Super brightness Combo beam with triple row and nest reflector cup design in the middle for extreme light efficiency. Upgrading reflector cup The broad reflective plate on both sides allows multi-angle refraction, ideal for ambient illumination. Curved design The curved design can suit for most of the vehicles. The fashionable appearance makes your off-road vehicle looks pretty cool after installation. High performance IP67 Waterproof rate, efficient cooling, die-cast aluminum alloy housing, over 30, 000 hours lifespan. Package includes 1PC 52 inch curved LED light bar and mounting brackets.

MATERIAL Aluminum alloy. Durable mounting brackets were waterproof dustproof shockproof.. EASY to INSTALLThe max adjustable agle of the mounting bracket was 45 degree. Also can be free slide in the back of LED light. Allow you to change the directon of light beam, lighting every corner.. WIDE APPLICATIONS Fit for 4 inch to 54 inch LED pods and LED light bars, suitable for most kinds of Car, Truck, Off Road. 4WD, SUV, ATV, UTV, Farming, Tractor and so on.. EASY to INSTALL Mounting the brackets on your LED light and tighten anti-loose screws, need not worry about fall down shaking.. BUY with CONFIDENCE If you have any questions, please feel free to contact Moso LED..

DIMENSION 3.66 1.7 1.28 inch.DO NOT COME WITH LED LIGHTS. MATERIAL Heavy duty Die-cast aluminum. With anti-vibration rubber gaskets to avoid damage to your car paint, and raise the light bar height avoid scratching during driving.. APPLICATION Can perfect apply to most side mounted LED Light Bar in the market.. ADJUSTABLE Angle-Adjustable side mounting brackets allow to achieve optimal angle you need.. PACKAGE Including 2 Side Mounting Brackets 2 Rubber Pads For a Steady Installation Necessary Mounting Hardwares Bump protection ring, 8mm Screw set for a strong supporting..

The universal magnetic light bar base is made of solid steel and strong magnetic base, without drilling, no falling, emergency braking and no shaking.. High compatibility It can be used to install any side-mounted light bar on the hood or roof, straight or curved, single row, double row, three row or four row. Everything is normal, there is still enough space to adjust the installation angle of the lamp.. Convenient installation No need to drill, just perform a plane test, install the lamp on the bracket, and then install the entire kit in the installation position.. Material Soft rubber can protect the magnet from damage, avoid scratches on the painted surface, and restrict the magnet from sliding on a smooth surface.. Perfect after-sales service We promise a one-year warranty. If you have any questions, please contact us in time, and we will reply you within 24 hours..

Durable Material Made of sturdy 304 stainless steel, protecting itself well from corrosion and rust in bad weather.. Free Adjustability Youre able to freely adjust 180up and down and 60left and right to make sure your light is at the exact lighting direction and at a perfect lighting angle.. No Drilling Anti-slip Design No drilling is required, just clamp the kit and tighten up. The clamp kit comes with anti-slip teeth and rubber pad to make sure a firm installation and no scratches left on the surface of the hood.. High Compatibility Can used to mount different thickness of work lights, fog lights, driving lights etc. As only the max limit of the clamp board thickness on the vehicle is within 8mm.. Package Include 2 x 304 stainless steel brackets Lamp is not included., 2 x hex Allen wrench..

Strong Hold Each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held even on emergency braking or driving on the rugged mountain road.. Anti-scratch The magnetic bases are coated with rubber cover to protect from scratching the hood and add on a secure installation.. Multiple Mounting Functions You can use a single magnetic base separately to mount small led work light, or use two or three together to mount a longer bottom-mounted LED light bar.. Easier Mounting No drilling needed, just do flattest, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, please the 7th picture on the left.. Package Include 2 x magnetic mounting base.

High Waterproof Performance This triple row led light bars feature IP67 waterproof rate dust-proof quake-proof anti-explosion Durable to withstand any harsh condition life span over 50 000 hours. Adjustable mounting bracket the bracket can be adjusted and slid offering convenience to adjust position flexibly when needed. Combo Beam Combined with spotlight and floodlight combo beam in a light bar for optimal light spread With triple row and nest reflector cup design in the middle for extreme light efficiency Broad reflective plate on both sides allows multi-angle refraction ideal for ambient illumination. Better Heat Dissipation Special designed 6063 Aluminum profile with Thermal grease can improve the heat dissipation ability Energy efficient and low power consumption Come with adjustable mounting bracket easy to install. Package Includes 1 x 12 Inch 300W led light bar and 2 x 4 inch 60W triple row flood spot led light 1 x Wiring Harness Kit - 3 Leads. Fit type Universal Fit.

ADJUSTABLE - The 1.75 roll bar clamps equipped with 6 kinds of mount holes allow you to adjust the mounting height, as well as be adjusted 360 to change the emission angle.. WIDE APPLICATION - Perfect used for roll cage, bumper guard, roof rack or other 1.75 tubular area to create unique mounting points on LEDHalogen Light Bar, SpotFogDriving Lights with M6M8 mounting bolts.. POWERFUL SUPPORT - With lighted-weight aluminum self-adhesive rubber design to keep your light bar from moving and provide powerful support for almost all size light bar, the excellent protect coating for better prevent external damage. NO DRILLING MOUNT - The roll bar tube mount can be installed at any positions of your off road vehicles, trucks, ATVs, UTVs, power sports, motorcycles, boats without drilling, easy to install and disassemble, provide you perfect tighten attached point. PACKAGE INCLUDED - 1.75 light bar brackets 2 , self-adhesive rubber pads 2, Necessary mounting hardwares 2, offer you 24-hours online after-sale services..

High Quality It is made of strong and lightweight aluminum alloy material. The sturdy bracket can firmly fix the light bar. Quakeproof when passing through rugged terrain.. Adjustable BracketThe pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.. Sliding Black Block No need drilling, if there is a mounting hole before, the sliding block can slide left and right to fit the existing holes.. Easy To Use Works with LED light bar, side mount screws and bolts, directly mount onto your bull bar, grille guard, car top racks, etc.. Fitment Apply to most slide mounted LED light bars 18W, 36W, 72W, 108W, 126W, 162W, 198W, 234W, 252W, etc.. Fit type Universal Fit.