Top 10 Best Light Bar Mounts

LIVE WITHOUT LIMITS - Don't be held back by one-dimensional bar clamps. Our unique clamping system features a 360-degree rotating neck designed to give you even more control over your light placement, regardless of the position or angle of your bars.. HANG ON TIGHT - Aggressive, straight knurling on the mounting surfaces gives your lights the traction they need to hold on through the harshest terrain. And with a zero-slip, locking stud design, these clamps wont twist when you twist the throttle.. ROCK SOLID - On the trail, there's no room for weak hardware. Engineered to be thicker and more durable than other bar clamps and equipped with rugged stainless steel bolts, these bar clamps have earned their place at the top of the podium.. UNYIELDING PROTECTION - Specially designed rubber inserts shield your lights against damaging vibrations, provide an unequaled level of light stabilization, and protect against the unforgiving conditions of the off-road.. UNMATCHED VERSATILITY - Go anywhere with a clamp that is as flexible as your machine. These clamps include adapters to fit 1, 1.5, 1.75, and 2 bars and two different length mounting neck with studs for added clearance adjustment..

DIMENSION 3.66 1.7 1.28 inch.DO NOT COME WITH LED LIGHTS. MATERIAL Heavy duty Die-cast aluminum. With anti-vibration rubber gaskets to avoid damage to your car paint, and raise the light bar height avoid scratching during driving.. APPLICATION Can perfect apply to most side mounted LED Light Bar in the market.. ADJUSTABLE Angle-Adjustable side mounting brackets allow to achieve optimal angle you need.. PACKAGE Including 2 Side Mounting Brackets 2 Rubber Pads For a Steady Installation Necessary Mounting Hardwares Bump protection ring, 8mm Screw set for a strong supporting..

2-pack set of universal fit side mounting brackets come with screws, nuts, accessories to install these brackets. Compatible with most Single-Row LED light bars on the market Good for both straight or curved LED light bar up to 51.5 250W. 360-degree rotation, allows you to adjust the angle freely. Good for most LED light bar brands such as iJDMTOY Off-Road, Rough Country, Rigid Industries, Auxbeam, Nilight, etc.

Heavy-duty bracket High-quality aluminum alloy material and Advanced production process, the mounting bracket is impact resistant and anti-corrosion. Mounting position 4 different locationsmethods to install the off-road lights. On the bull bar, 2 Sets of mounting holes on top and 1 set in front. Note There is a possibility that the bracket holder may block some vehicles' parking sensor. In some cases, you may be able to drill additional holes on the bracket to securely mount the bracket. Easy installation No drill, no modification required, just like replace a license plate using its mount location, usually can be installed in 20 minutes. Universal fitment Fits for almost all car, Jeep, truck, Pickup, SUV, 4x4, etc. Work with most off road auxiliary lights, fog lights, driving lights, LED work Lamp and LED light bars. Package include 1Pc front license plate mounting bracket.

ADD MORE LIGHTS, LESS HASSLE- Simplify the installation of LED light bars work lights without drilling any holes in the bodywork quickly and securely mount LAMPHUS Cruizer Series Light Bars or any other light bar with 10mm mounting screws to your roof rack, bull bar, roll cage, or headache rack.. ALMOST ENDLESS APPLICATIONS- Can be used on tubes measuring 1, 1.5, 1.75 2 in diameter perfect for off-road vehicles, ATVs, UTVs, trucks, boats, farm vehicles more.. CAST ALUMINUM CONSTRUCTION- Precision-welded from cast aluminum, our clamps are strong built to last.. COMES FULLY-LOADED- Includes everything you need to start mounting your favorite LED light bars to your ride, including an Allen Hex Key.. RUBBER INSERTS DAMPEN PROTECT- Rubber inserts for snugger fitment with a wider range of sizes help dampen vibrations during off-roading and protect your bull bar from being scraped..

Multi-application The mini bar clamp is designed for a smaller horizontal tube size 0 75 1 1 25 It is applicable for roof racks roll cages bull bars handlebars on ATV UTV and trucks. High Compatibility Compatible with various types of light bar brackets the 10mm screw hole diameter fits all light with 8mm mounting screws. Perfect Fit Rubber Inserts Rubber insertsstrip are designed with rubber teeth that can fit perfectly and grip securely with the thread of inside clamp Making installation easier and always protecting the metal from being worn down. Built With Quality Clamps are built using precision-welded cast sturdy aluminum makes it lightweight but pretty neat and durable.. Make Light Mounting Easier With the high compatible bar clamp youll hassle, free of drilling holes in your vehicle body. Simple all in one kit makes your life easier..

This kits also include a-pillar brackets for a well-rounded lighting setup. Also includes the full wiring harness with switch, and silicone protectors that go in between the bracket and the vehicle to protect your Jeep's paint. With a fully bolt-on design, these mount securely to factory locations and include upgraded hardware. Fit type Vehicle Specific.

ADJUSTABLE 360-degree free rotation, allows you to adjust the viewing angle freely.. WIDE APPLICATIONS 2 Pack side mounting brackets fit for most of LED pods and LED light bars. Easy to install in 1 hours.. MATERIAL 6063 Aluminum Alloy. Durable mounting bracket is waterproof dust proof shockproof.. ANTI-SCRATCHING Come with rubber pads and need not worry about scratching your car surface.. If you have any questions, please feel free to contact us..

Strong Hold Each magnetic base comes with 12 PCS magnets. Once matching well with the flat surface, it is strongly held, no falls down even on emergency braking or driving on the rugged mountain road.. High Compatibility Can be used on the hood or roof to mount any side-mounted light bars, straight or curved, single row, double row, triple row, or quad row. All works well and still remain ample room to adjust the mounting angle of the light.. Dual Mounting Functions Directions Can be used as a whole to mount side-mounted light, or remove L shape bracket, just use the magnetic base to mount bottom-mounted light. For the L shape bracket, you can also choose to mount them inward or outward.. Easier Mounting No drilling needed, just do flattest, mount the light on the bracket, and then mount the whole kit on the mounting position. For detailed mounting tips, please check the 9th picture on the left.. Package Include 2 x magnetic mounting brackets with sucker base. Fit Type Universal Fit.

Fitments The flag mount bracket is perfect for 1.75-2inch roll bar. Compatible with almost UTV, for example Can Am Maverick X3 Commander Polaris RZR 1000 900 XP Pro. Multipurpose This mounting bracket can not only mount the flag on it, but also can mount the whip light, antenna, spot light, light bar on it. It is very useful for most drivers. High-Quality The whip light mounting bracket is made of 7075-T6 Aluminum, one of the highest strenght alloys. It is anodized finishes and the bolt is 304 stainless steel will prevent from oxidizing and scratches which increases resistance to corrosion. 360 Roating Unlike most mounting stands on the market, you can adjust them 360 degrees to any angle you like. Therefore, there are more options for the mounting position of this bracket. Easy to install No modification or drilling is required. Tools and accessories are already included. It can be installed easily just by tightening the screws.