Top 10 Best R2r Dac

Dual architecture Independent R2R 1Bit,support native PCM native DSD and DSD to PCM.. PCM NOS Without any digital signal processing,bypassing the volume adjustment,raw PCM stream was decoded by the R2R array directly.. Native 1Bit DAC,support DSD 512 via USBand DSD 1024 via IIS.The DSD stream decoded by the independent 1 bit convertor without DSD to PCM converting. Volume is fixed under this mode.. StreamerRenderer Support roon,upnp and more protocols in the future.. Replace the input signal's clock with precision oscillators local or external. Interference from the input source's clock is avoided..

Discrete R2R DAC R-2R ladder DAC converts the digital signal to analog signal by switching resistors' array, it provides a more natural sound. However, this architecture needs precision resistors and deep development to archieve fine performance.. Native 1Bit DACsupport DSD 512 via USB and DSD 1024 via IIS. The DSD streamdecoded by the independent 1 bit convertor without DSD to PCM converting.Volume is fixed under this mode.. CPLD Complex Programmable Logic DeviceSignal routing Clock management 2nd order PLL DOP decoding Depop for PCMDSD.. Clock synthesization Replace the input signal' s clock with precision oscillators local or external. Interference from the input source' s clock is avoided. Function off IIs, AES, COAX, OPT, BT PCM NOS, 1 Bit Function on USB LAN K2, ultra-low noise clock synthesizer provides precision clock from local oscillators or external clock in.. LPF is specifically designed for the DA converter using discrete devices. Final parameters of the circuit are adjusted with subjective listening. Different from IC s, discrete circuits provide the possibilities to control every detail in sound and performance. But the parasitic effects introduced huge challenges to development experience and device' s quality..

Massive power and superior sound from a sleek and stylish chassis The EF400 is the modern desktop DACAmp solution, with a compact footprint and price to match, but with sonics that outperform products many times its size. Ultra-high efficiency and low power consumption at maximum stability4.4W per channel balance output. Embedded with HIFIMAN HIMALAYA R2R DAC- Recipient of 2022 VGP Gold Technology Award Japan.. Experience the prized performance of the R2R DAC HIMALAYA is a discrete R2R DAC digital-to-analog module that is based on the FPGA algorithm. The combinations of its low audio frequency range, out-of-band noise, and low energy consumption make it a perfect match for high-performance audio equipment. The HIMALAYA DAC module supports the standard PCM music signal transmitted by the most common IIS Integrated Interface of Sound audio interface, with a maximum resolution of 24Bit.. Full Balance The four-channel differential structure features a DAC, buffer and active filter that add up to unbeatable fully balanced output for stunning performance from a Class AB DACamplifier. The four-channel fully differential amplifier circuit features a maximum output of 10.7 Vrms THD1 on a 36 resistor equivalent load. The result fully balanced output that is beyond compare.. 4-level Function Switch High Gain NOS, High Gain OS, Low Gain OS, Low Gain NOS Headphone Out Front Panel 6.35mm Single-ended 3.5mm Single-ended 4.4mm Balanced XLR 4-Pin Balanced Output. Line Out Rear Panel CANNON Balanced Output RCA Single-ended. Input USB Type C USB-B. 110V.

Discrete R2R DAC R-2R ladder DAC converts the digital signal to analog signal by switching resistors' array, it provides a more natural sound. However, this architecture needs precision resistors and deep development to archieve fine performance.. Native 1Bit DACsupport DSD 512 via USB and DSD 1024 via IIS. The DSD streamdecoded by the independent 1 bit convertor without DSD to PCM converting.Volume is fixed under this mode.. CPLD Complex Programmable Logic DeviceSignal routing Clock management 2nd order PLL DOP decoding Depop for PCMDSD.. Clock synthesization Replace the input signal' s clock with precision oscillators local or external. Interference from the input source' s clock is avoided. Function off IIs, AES, COAX, OPT, BT PCM NOS, 1 Bit Function on USB LAN K2, ultra-low noise clock synthesizer provides precision clock from local oscillators or external clock in.. LPF is specifically designed for the DA converter using discrete devices. Final parameters of the circuit are adjusted with subjective listening. Different from IC s, discrete circuits provide the possibilities to control every detail in sound and performance. But the parasitic effects introduced huge challenges to development experience and device' s quality..

AC power supply 115-230V, 5060Hz. Power consumption 30WFrequency response 0.004 1KHZ A-weighted. Analog output RCA 2.2 -10 V RMS 1KHz Analog output XLR 4.4 -10 V RMS 1KHz Support format DSD 2.8224MHZ DSD1X All Input 5.6448MHZ DSD2X, 11.288MHZ DSD4X USB Only. Support format PCM24bit44.1,48,88,2,96,176.4,192,352.8USB, 384USBKHZ SNR 115dB RCA 114dB XLR Dynamic range 119dB RCA, 120dB XLR Stereo crosstalk -124dBRCA, 130dBXLR.

Discrete R2R DACR-2R ladder DAC converts the digital signal to analog signal by switching resistor's array. XMOS XU216DAC-R26 using 2nd XMOS XU216, supports up to PCM768 DSD512.. 1Bit DAC Native1 Bit DAC, supports DSD 512 via USB and DSD 1024 via IIS .The DSD stream is decoded by the independent 1 Bit DAC without DSD to PCM converting.. Clock SynthesisDAC-R26 adopts ultra-low noise clock synthesizer K2 clock . Provide an accurate clock from the local oscillator or external clock input. The interference from the input source clock is avoided.. LPF Of DAC-R26The discrete circuits of the DAC-R26 control every detail of sound and performance. LPF is specifically designed for the DA converter using discrete devices.. Full MQA decodingThe DAC-R26's USBOPTCOAXAESIIS inputs all support full MQA decoding, PCM44.1kHz-384kHz. Presenting you with a complete and rich music scene..

1x Micro USB 768kHz32-bit Capable Input. 1x 3.5mm Jack Coaxial 768kHz32-bit Capable Input. 1x Optical TOSLINK 96kHz24-bit Capable Input. 1x 1amp Micro USB Charging Port Input. 2x 3.5mm Headphone Jacks Output.

The most flexible converter, the ADI2PROFSRBE provides balancedunbalanced IOs, double extreme power headphone outputs, SteadyClock III, 4-stage hardware input and output control, DSP-based signal processing, and class-compliant USB compatibility. Perfect for those who take a no-compromise approach to audio, the ADI2PROFSRBE features two servo-balanced analog inputs on combo XLR TRS jacks, two separate balanced and unbalanced outputs on XLR and TS, two stereo Extreme Power headphone outputs on the front, an optical SPDIF IO that also understands ADAT, and coaxial SPDIF RCA and AES IO XLR via an included breakout cable. Ideal for sound capture and reproduction, the main PCB is a ten-layer design with a custom copper thickness that provides undisturbed sound. Offers high-resolution display operation with the 5-band parametric EQs for entirely individual phone compensation, adjustable BassTreble controls, adjustable loudness filter, and selectable ADDA filters.

AK4499EX 2Two AK4499EX DACS and one AK4191 modulator from Asahi Kasei Microdevices.With independent power supply and grounding for each channel, separate digital-analog architecture eliminates interferences from the beginning. Streamer Renderer Easy access to high-quality online streams. Roon, UPnP and HQPlayer NAA are supported at present, and there will be more protocols in the future.. CIock synthesization Replace the input signal' s clock with precision oscillators local or external. Interference from the input source' S clock is avoided.. K2, ultra-low noise clock synthesizer Provides precision clock from local oscillators or external clock in.. LPFLPF is specifically designed for the AK4499EX using discrete devices. Final parameters of the circuit are adjusted with subjective listening. Different from ICs, discrete circuits provide the possibilities to control every detail in sound and performance. But the parasitic effects introduced huge challenges to development experience and device' s quality..

The most versatile DAC available, the ADI2DACFS provides balancedunbalanced analog IOs, extreme power headphone output, a low noise in-ear-monitor output, SteadyClock FS, class-compliant USB compatibility, and same rates up to 768 kHz. Developed by RME engineers, the updated ADI-2 DAC uses ESS's ES9028Q2M in a particular circuit variant that allows the chip to perform with professional-level quality. The ADI-2 DAC FS allows those who use in-ear-monitors to receive the full dynamic range on playback, and its ground noise floor is 10dB lower than the one of the Extreme Power output. When AutoDark is activated, the display, function keys, volume knob, and the standby button go off after 10 seconds of no user operation while touching any button or control will turn on all lights for 10 seconds. Included is a new extended multi-remote support that has clearly labeled buttons for accessibility in any lighting situation.