Top 10 Best Signal Converters

PROZOR 192KHz Digital to Analog Audio Converter Converts coaxial or toslink digital PCM audio signals to analog LR RCA and 3.5mm Jack audio simultaneously not capable of being reversed. Input Audio Connector 1 x Toslink, 1 x RCA Coaxial Output Audio Connector 2 x RCARL, 1 x 3.5mm Jack Powered by 5.5mm USB Power Cable Power Adapter is NOT Included Do Not Use Other Plugs, It Can Only Use 5V 1A Plug. Supports Sampling Rate at 32KHz, 44.1KHz, 48KHz, 96KHz, 192KHz 24bit S PDIF Incoming Bit Stream on Left and Right Channels. Supports Uncompressed 2 channel LPCM or PCM Digital Audio Signal Output Provides Electromagnetic-noise-free Transmission5.1 channel is incompatible, please set the audio output to PCM or LPCM. Easy to Install and Simple to Operate Can be Used for PS3, PS4, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps, Etc.

2 in 1 HDMI Audio Return ChannelDAC Audio Converter The HDMI audio return and digital-to-analog audio converter can output the TV's sound to the optical fiber coaxial 3.5mm coaxial headphone jack can output sound at the same time through the HDMI ARC interface. It also supports conversion of digital audio fiber or coaxial signals to analog stereo signals.. How to Connect When as HDMI ARC, You need to use a standard HDMI cable to output the TV's sound to the optical fiber, coaxial, R L, 3.5 mm headphone jack through the HDMI ARC interface can output sound at the same time,,,When as a Digital to Analog Audio Converter, You can also use digital audio coaxial and optical ports as signal source input to convert to analog audio R L, 3.5mm output.. HDMI Audio Return Channel HDMI ARC Audio Adapter Can be Connected to HDTV that Supports ARC, and Output Audio from TV to Sound Bar, Power Amplifier, Speakers or Headphones Note please make sure to use standard 19 1 HDMI cable.. PCM LPCM 2.0CH audio Format Support 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz Sampling Rate. Note If using stereo RL or 3.5mm jack output, this unit only supports LPCMPCM audio format output, not 5.1 audio output.. Easy to Install Remote Volume ControlWidely Used in HDTV, Sound Bar, Amplifier, Speaker, Home Theater System, AV Amplifier, etc. When Using the TV's ARC Function,You can Use the TV's Remote Control to Control the Volume. Only supports RCA left right and 3.5mm output interface, please turn on the CEC function of the TV.

Digital-to-AnalogSimple solution to convert digital coaxial or optical audio to 3.5mm jack or RCA LR analog audio signal not capable of being reversed. Plug and playOptical or digital coaxial audio output from your source devices such as HDTV to this converter, then RCA LR or 3.5mm AUX to your headphone or stereo speaker Please set PCMLPCM audio when using. Simple SettingsJust set the audio format to uncompressed 2-channel LPCM or PCM in your TV or other source devices. Sampling rate support 32KHz, 44.1KHz, 48KHz, 96KHz and 192KHz 24-bit. Durable QualityHeavy-duty aluminum alloy enclosure protects the insides and keeps the unit cool by aiding in quick heat absorption and dissipation. 100 Satisfaction GuaranteeYears of experience in audio video products allows us to have the ability to provide you with premium quality products and professional support services. If you have any questions before or after purchase, please feel free to reach out to us on Amazon or Google, 100 satisfaction guarantee.

Decodes DTSDolby Digital source digital audio to analog 2.0CH stereo audio output RCA LR and 3.5mm Headphone, Supports Digital Audio Input SPDIF Optical, Coaxial - Make sure switch to the correct input on the side. Supports simultaneous RCA LR and 3.5mm Headphone outputs. Make sure the the plastic removed. And the Optical Cable is pushed in completely.. TROUBLESHOOT Signal from the TV goes into SPDIF Optical, or Coxial input of the DA34 and The output of RCA or Headphones will go into your analog speakers or headphones. Make sure the power adapter is connect properly. And all the cables are inserted all the way in. If there is still no sound, please change the TV Audio out to PCM Only from the TV Menu..

The ADI-2 DAC includes an improved SteadyClock, a fine-tuned to perfection analog circuitry, new MRC remote control, Extreme Power headphone output and a very special IEM output. It has all the bells and whistles that made the ADI-2 Pro famous, including its perfectly transparent sound signature and full DSP processing with Bass, Treble, Loudness, 5 Band Parametric EQ, Crossfeed and much more. The ADI-2 DAC is the home and hi-fi optimized version of the ADI-2 Pro, a studio ADDA converter of the highest quality. As the most versatile DAC available, the ADI-2 DAC offers balancedunbalanced analog IOs, an Extreme Power headphone output, a super low noise IEM output, SteadyClock FS, 4-stage hardware output level control, DSP-based signal processing, external power supply operation, Class Compliant USB compatibility, sample rates up to 768 kHz as well as DSD and Direct DSD playback. The updated ADI-2 DAC uses AKM's AK4493 in a special circuit variant developed by RME engineers that allows the chip to perform at its best. With noise levels of 123 dBA, distortion less than -120 dB, or THDN of -116 dB, the device delivers outstanding measured values.

Bi-Directional Digital Audio ConverterOptical-to-Coaxial or Coax-to-Optical Digital Audio Converter Adapter.. High Definition AudioNoise-free transmission, high definition audio output for your amplifier and speaker.. Easy to Setup Plug and play, no need any software and driver.. Support Audio Format Support multi-channel surround sound, uncompressed PCM audio and compressed 5.1 audio, DTS to audio processor or AV receiver with capacity of decoding audio source.. Wide ApplicabilitCompatible with Blu-ray Player, Satellite receiver, BR player, Xbox 360, HDTV, DVD, Amplifier, Sound Bar, Speaker and all device with digital audio out port..

eSynic DAC Converter with 3.5mm Jack and RCAThe Audio Converter Converts Coaxial or Optical Digital PCM Audio Signals to Analog RCA LR and 3.5mm Jack Audio Simultaneously, You can Play Music and Share at the Same Time Great Idea for Your Bluetooth HeadphoneSpeaker with Your TV.. Supports Mainstream Digital OpticalCoaxial InputSupport Sampling Rate at 32, 44.1, 48, and 96 KHz, 24-bit SPDIF Incoming Bit Stream on Left and Right Channels, Provides Electromagnetic-noise-free Transmission.. Supports Uncompressed 2-channel LPCM or PCMThis DAC Converter Support 2-channel LPCM or PCM Digital Audio Signal Output, NOTE Not for 5.1 Channel, Please Set The Audio Output to PCM or LPCM. If Samsung TV or LG TV Audio Format Set To PCM LPCM without Sound, Please also Turn On Its External Speakers. Aluminum Alloy Shell and Gold Plated Interface DesignOverall Shielding without Signal Interference, Gold Plated Sockets, Enhance HD Sound Signals over Long Distance Broadcasting Smoothly.. Plug and PlayNo Need to Install Drivers, Come with 1m Fiber Optic Cable and 5.5m USB Power Cable, Easy to Install and Operate Also, Compact Size, Easy to Carry, Ideal for Home or Professional Audio Switching Such As PS3, PS4, Blu-ray Player, HD DVD, Home Cinema Systems, AV Amps..

Audio converter for connecting optical coaxial or Toslink digital devices to analog RCA sources. Includes an audio converter, fiber cable, external micro USB power supply, and headphone adapter. Compatible with media players CD, DVD, and Blu-ray, computers, AV receivers, digital TVs, gaming devices, and more. Provides crystal clear sound supports sample rates to 192KHz 24-bit SPDIF incoming bit stream on left and right channels. Convenient and easy to use no need for multiple adapters or overly complicated audio set-ups. Product dimensions 2 x 1.6 x 1 inches LxWxH.

This module is designed for that voltage signal will become weaker with the increase of transmission distance through the process of circuit signal transmission, this module can avoid it.. KNACRO voltage transmitter will be powered by 7-36V, current input range is 4-20mA0-20mA, voltage output range is 0-3.3V0-5V0-10V.. Zero and full range can be adjusted as your needs the module is with high stability, good linearity, industrial grade.. The current signal sampling resistor using high-precision color ring resistance, offers high accuracy, small temperature drift and high power.. KNACRO signal converter is designed with reverse connection protection, if wires connect reversely, it will protect the module from burning..

192Khz 24Bit sampling rate Support 192Khz 24Bit sampling rate on the optical and SPDIF signal,built-in interference immunity and no signal input squelch circuit Audio Format PCMLPCMPlug-and-play, easy to install and operate. Compatible with PS3, HD DVD, PS4, Sky HD, plasma Blu-ray home theater, AV amplifiers, etc Note 5.1 channel signal is not compatible such as Dolby AC3 Set the format steps Setting--Sound--Audio Format-PCMLPCM. Widely compatible with 32600 headphonesDesigned for game player and music fancier support all headphones within 32600. Volume adjustment knob Built-in volume adjustment circuit and control knob ,completely solve the problem of low volume when using high-impedance headphones used in DAC products , with surging power and full thrust. Bass adjustment knob The 192KHz DAC innovatively designed bass adjustment functionCan provide stunning stereo sound, heavy bass effect, create the perfect environment different from the sound field, gain the effect was very obvious, which makes you reveled in a world by bass. The design of portable and fashion aluminum alloy shell and gold-plated interface improved overall immunity ,it makes the sound clear and pure .Widely compatibility ,it can be used for PS3,PS4,Blu-way player,HD DVD,Home Theatre system, etc. Easy to install , plug and play.